eddy current

Elctromagnetic Techniques for Conventional and Array Tubing and surface Inspection:

S2G2-800 Multi-Technology Eddy Current Instrument:

  • Portability and autonomy:

The S2G2 instrument weighs approximately 10 L (688 in3) in volume or 4.5 kg (9.92 lbs), making it the most compact Eddy Current Testing instrument on the market.

It is easy to carry and very sturdy. The instrument offers over 5 hours of autonomy with no battery pack. It offers 8 hours of autonomy with a battery pack.

  • Built-in Versatilty:

The Sky is the limit. Use the S2G2-800 built-in capacities by combining any of the following testing technologies to meet your specific needs:

  • Eddy Current Testing (ECT)
  • Eddy Current Array (ECA)
  • Remote-Field Testing (RFT)
  • Near-Field Testing (NFT)
  • Near-Field Array (NFA)
  • Magnetic Flux Leakage (MFL)
  • Internal Rotary Inspection System (IRIS)
  • Signal/Noise ratio:

Based on a new digital technology, the S2G2 detects defaults that would otherwise remain unnoticed by other instruments available on the market thanks to our signal to noise ratio.

  • Array Technology:

The equipment drives multi-element probes in all technologies:

Remote-Field, Near Field, Eddy current and more from the same Array connector.: .
S2G2-800 Multi-Technology Eddy Current Instrument		  
 
Brochures:
More Information:		  

 

Conventional Eddy Current:

AeroCheck Family - eddy current flaw detector:

The AeroCheck+ is the follow on Eddy Current (EC) Flaw Detector from the AeroCheck. The AeroCheck+ offers the same features as the original AeroCheck, including Rotary Capabilities as standard, but in addition offers Dual Frequency with Auto-mix and Conductivity Measurement as well as an outstanding Frequency Range from 20Hz to 12.8MHz.
Auto-mix simplifies the sometimes complex procedure of mixing two different frequency signals and can be achieved on the AeroCheck+ through a series of easy steps. Setting the Auto-mix itself is as simple as pressing one key.
Designed and manufactured in the UK, the AeroCheck+ comes with the ETher NDE promise of outstanding customer service and technology that is both reliable and advanced.
 
 The  New AeroCheck 2 offers all the advanced features of the AeroCheck Plus (including, Loop, Guides and Trace) but without Dual Frequency and Conducivity Capability. A summary of the key features and comparison with older products is given here.

The AeroCheck Plus and 2 can be used with all reflection, bridge and absolute probes from all manufacturers and uses industry standard 12-Way Lemo and Co-axial Lemo 00 connectors, reducing the need to use adapters.


Brochures:

 

 AeroCheck Family - eddy current flaw detectors

 

 

More information:

 

 

Eddy Current Probes and accessories.

 

Brochure:
 Eddy Current Probes and accessories